Description
For anyone that is making over 450WHP, we have the solution for you... Finally, the ultimate clutch setup is now available for your big power Saab B207 build. We are very proud to be working with Clutch Masters to be able to offer a twin disk clutch setup for the six-speed F40 in the Saab 9-3 B207. We are happy to be working with Clutch Masters to make this product. Please email us if you have any further questions.
Specifications:
Available Stages...
“Street and Race” (TD7S) – 1 ceramic rigid disc, and 1 fiber tuff rigid disc
“Race” (TD7R) – 2 ceramic rigid discs
The Clutch Masters FX725 is a 7.25" (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn't ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track.
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003" of flex where as a cast or stamped unit can see as much as .030" of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn't wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
What makes our FX725 and FX850 Multi-Disc Kits truly special, and a feature unique to Clutch Masters is our QR System, or Quick Release Pressure Plate. The QR System Incorporates three spring-loaded bolts allowing the pressure plate to engage and disengage evenly and smoothly while reducing internal clutch noise/chatter by up to 50%. The QR System was developed to provide quiet and smooth operation for the street user while delivering the performance a multi-disc race clutch needs.
Flywheels are made for each specific application in either aluminum or steel. Our aluminum flywheels are machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Aluminum flywheels are Type 3 hard coat anodized to ensure their durability and performance lasts. Each aluminum flywheel includes a replaceable insert. Steel flywheels are machined from 1045 billet cores and are then black oxide treated for rust prevention.
*Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life-expectancy than OEM, however that is not guaranteed. Improper installation, driving style, performance upgrades, break-in procedure, and light weight flywheels will affect, and have a role in, determining the life-expectancy of the clutch kit.
*A MINIMUM OF 500 MILES IS REQUIRED FOR PROPER CLUTCH BREAK-IN
Refund Policy
CANCELLATIONS:
Orders can be easily canceled before the shipment and payment is processed by contacting us through our phone number or email. If the shipment and payment is processed already and you would like to cancel an order, it must be within 24 hours of the time the order was placed. Please email us the reason for your cancellation, your order number, and a copy of your receipt. Refunds may take up to 30 days to process, depending on your financial institution.
NON-DEFECTIVE PRODUCT RETURNS:
Any Snail Werx Inc. product that is returned and is non-defective incurs a 28% restocking fee. This is due to the limited availability and customization of our products.
WARRANTY ON OUR PRODUCTS:
Each Snail Werx Inc. product is entitled to its own, unique warranty. Each warranty for different products may vary, and they are clearly displayed in most item's descriptions. Restocking fees may also apply to particular items, due to their customization and availability. If you have a question about an item or its warranty details, please contact us.
USED/ REFURBISHED PART WARRANTY:
Any and all of the used/refurbished parts purchased from Snail Werx Inc. have a 30 day warranty. If a part is faulty or damaged, we will replace the part, if it is within 30 days of purchase. If we are out of the part in question and it cannot be replaced with another, you will be issued a refund. Refunds may take up to 30 days to process, depending on your financial institution.
SATISFACTION GUARANTEE:
We stand behind our products and our work with pride, if there is something that you are unsatisfied with, please contact us and we will rectify the issue. Snail Werx Inc. has a 30-day satisfaction guarantee. Restocking fees may apply due to the customization and availability of many of our products.
The Snail Werx Inc. warranty procedure is as follows:
- Please begin this process by first contacting one of our Snail Werx Inc.team members. You can contact us through our provided phone number or email. Some products may need to be sent to us for further inspection before the rest of the warranty process begins.
- Please email us a detailed description of the fault in the product that you received. Also, please attach your order number and a copy of your receipt for the original order to this email.
- Once we contact you in regards of the claim and details on your product, we will provide a claim number. This claim number will need to be printed in two copies. One copy is to be attached to the outside of your package, and one copy needs to be placed inside your package with your product. The customer is responsible for the means of shipping to Snail Werx Inc. Restocking fees may be applied, depending on your products warranty.
Please utilize this shipping address in this format:
Snail Werx Inc. ATTN: WARRANTY CLAIM
1747 Independence BLVD
Suite E1
Sarasota, FL 34234
- Once we receive your product, we will assess the issue. If Snail Werx Inc.finds the part, product, or component to be defective within the specific warranty period, we will address the issue. We may choose to repair, replace, or refund the product, depending on the extent of the fault in the product.
- The shipping process and details for the return shipping of warranty claims are the same as with any other order. Refunds may take up to 30 days to process, depending on your financial institution.